2014 Supercharged Subaru BRZ Featuring Status Racing

This perfected 2014 Subaru BRZ belongs to Matt Miller from Rochester, New York.  The car was featured this month on StanceWorks.com and features our Status Racing seats and harnesses as well as long list of very impressive mods such as BBS RS Wheels, Airlift, P&L Motorsports supercharger kit, STM Exhaust just to name a few.

Check out the full article on Stance works HERE


Click Here to find out more about Status Racing seats.


DSC0157 DSC0205 DSC0244 DSC0246 stitch4 subaru-brz-turbo-rs-title

Race Ready Porsche Cayman GTS fitted with Status Racing

Professional race car driver Mark Klenin recently picked up a set of Status Racing Ring GTX seats for his Porsche Cayman GTS that he has been working on building into a track ready monster! The seats feature gray ultra suede with red stitching/logo that fit the interior of the Cayman like a glove! Check out the photos below and let us know what you think!

Click here to shop Status Racing seats










Jeepspeed Crashes during the Mint 400 Race

We introduced you to Joey Miller and his Jeepspeed that was using our Status Racing Harnesses awhile back. Well this time the unfortunate happened when he rolled his Jeepspeed during the Mint 400 race. We are glad to hear that everyone walked away and was unscathed during the accident. Here are some photos of the aftermath.






Far From Stock! Jeff’s Subaru STI Featuing Status Racing Seats

Jeff’s 2004 Subaru STI is far from your everyday ordinary Subaru on the street! The car has been outfitted from top to bottom and we are happy to be among his very impressive list of mods! (See below for full list) His STI features a set of our Status Racing Laguna Carbon Kevlar Seats.

You can check out more of his car and his photography here on his flickr here





– Tomei m7960 Turbo
– GrimmSpeed PnP Exhaust Manifold and Crossover Pipe
– GrimmSpeed TGV Deletes
– GrimmSpeed Radiator Shroud
– GrimmSpeed Hood Struts
– GrimmSpeed Lightweight Crank Pulley
– APS 525dr FMIC
– 70mm APS CAI
– Forge Racing BPV
– Invidia N1 TBE
– AVO Turbo Inlet
– DW 850cc Injectors
– Walbro 255 Fuel Pump
– KillerB Oil Pick-Up Tube and Baffle
– KillerB Dual Reservoir
– Crawford AOS
– PIA Tune 350whp 330torque

Suspension and Wheels:
– F/R Cusco Sway Bars
– F/R Cusco Strut Tower Bar
– F/R Kartboy Endlinks
– FEAL 441 Coilovers
– Stage 2 StopTech Brake Kit
– 17×9 +35 GramLight 57D
– Dunlop Star Spec ZII 255/40/17
Rainy/ Snowy Weather:
– OEM 2004 STi BBS
– Michelins Pilot Sports A/S 225/45/17

– 05+ STi Rear Bumper with parking sensors
– 05+ STi Quarter Panel Flares
– WRX Side Skirts with F/R Strakes
– KS Tech Hood Scoop Delete
– KS Tech Louver Plate
– Rep V-Limited Front Lip
– License Plate Delete
– Hella Tones Painted White
– ForceWerkz Mature Style Diffuser
– JDM Spec-C Roof Vent
– JDM Fog Lights with Yellow Overlay
– JDM Rain Guards
-APR GTC-300 Wing
-APR Canards
-APR Front Wind Splitter

– Status Racing Laguna Carbon Kevlar Seats
– Rear 05 Black WRX Seat
– Auto Power Race Roll Bar/ Half Cage
– G-Force 6 point Harnesses
– Kartboy 6-Speed Short Shifter
– 6inch Shifter Extension
– JDM Black Duracon 6-Speed Shift Knob
– Pioneer 4100 touch screen
– Broadway Mirror
– ATI Gauge Triple Gauge Pod
– Prosport EVO Boost Gauge
– Prosport EVO Oil Pressure Gauge
– Prosport EVO Volt Gauge
– Custom Black Door Cards
– JDM Red Hazard Button
– Subaru All Weather Floor Mats
– Personal Grinta 350mm Steering Wheel
– Works Bell Quick Release and short hub

Status Racing GT-X Wrapped in White Leather with Diamond Stitched Lavender Inserts

These one off custom Status Racing GT-X seats were put together for one of our clients. They feature FRP backing and are wrapped in white leather with diamond stitched lavender inserts.

The Ring GT-X is part of the Standard series and available in simple leather colors with a white stitched Status Logo. Knowing how important comfort is for driving, the seats include a contoured foam cushion as a standard feature as well as side bolster padding. The high quality leather is form fitted to the Made in the USA black FRP composite shell. Because this is a racing seat, abs plastic harness pass through are inserted to accommodate our 3 inch Status Harness kits. Each Status seat features an aluminum logo name plate on the shell as a finishing touch.

Status Racing seats are made in the USA using high quality composite materials derived from our background in Military safety products. Each seat goes through our quality control inspections to make sure you get the most pristine product available. The seats do require separate purchase of side mounts, seat brackets, and sliders for your specific vehicle. Seats are sold individually. For other color, stitching, or design options please contact us









Built To Please! Subaru STI featuing Status Racing SPA Reclinable Seats

These images were shared to us by our customer of Their Subaru STI that properly demonstrates how things are done! The STI features a set of our Status Racing Carbon Fiber Spa Reclinable Seats wrapped in Grey Ultra Suede with Red Status Racing 3-inch harnesses

Here are some of the other mods.
Tsudo 3-inch catless downpipe
Tomei Titanium Catback Exhaust
Tomei Equal Length Header & UpPipe
TurboXS Hybrid 50/50 BOV
Walbro 255lph fuel pump
K&N Typhoon short ram intake
COBB turbo heat shield
Perrin Radiator Shroud (Red)
Perrin Alternator Cover (Red)
2014 STI Headlight Swap
DEPO Led tail lights w/ blinker vinyl overlay
Led interior and reverse lights
Hella Supertones
Perrin super short antenna
Torque solutions short shifter
BLOX racing 490 limited 24k gold shift knob
Nrg 24k gold chrome leather wrapped/red stitching wheel
Nrg short hub
Nrg 3.0 quick release
All weather floor mats and trunk mat
Custom suede and flannel wrapped interior
Planted seat brackets
Yoshihara Design Champion wheels in Bronze Limited 18×9 et35
Achilles ATR Sport 215/40/18
Ray’s black closed end lug nuts
Powerslot slotted rotors
Bc Racing BR series coilovers
2014 STI Trunk Swap and De Badged
Polyurethane CS – style front lip, side skirts, and rear aprons
Custom rear diffuser by @Con10der8
Spt vortex generator diffuser
Password jdm bumper quick releases (functional in front and rear)
Perrin license plate relocator








Rossion Supercars Chooses Status Racing for Competition

A long time ago I was cruising a highway in Spain when 2 Noble M400’s zipped past me on the Gumball 3000 event.  Ever since then, I wanted a Noble.  Well I picked up a Noble M400 last year and it sure was a blast.  But the M400 or M12 GTO was very kit car like and its successor the M15, was not available in the USA.  Well now here in the states, a company by the name of Rossion owns the rights to these cars and has been proving that the mid engine machine is no kit car at all.  What once was a frame built in the UK, a body formed in South Africa, combined with a Ford engine is now a very refined machine known as the Rossion Q1.

The Rossion Q1R Track is a competition version of their street machine featuring a 2.0L single turbocharged Ecoboost engine that makes 323hp and 305ft/lbs of torque.  However for those wanting more power, they can opt for the 3.0L Duratec engine that gives you a blistering 500hp and 500ft/lbs of torque.  Complete with aerodynamic upgrades, a full roll cage, fire suppression system, the Q1R is the ultimate track machine.  So the guys at Rossion decided to try out a better, American made seat, known as the Status Racing Ring GT-X.  The FIA approved seat fits all the needs of safety for this competition car.  Included with the seats is a pair of FIA approved 6 point harnesses.

We are very happy to see the Status Racing FIA approved seat in true race car and cant wait to get more updates and pictures from the Rossion team.  Read more about Rossion Cars here and view all our Status Racing FIA Approved Seats here.






STREETKARNAGE Nissan 180sx Fitted with Status Racing Seats!

All the way from the land of hooning comes this stanced and ready to battle Nissan 180sx from StreetKarnage. The 180sx features a set of Status Racing seats and harnesses with a fully custom welded in candy apple red cage, Haltec Digital Dash and a ASD Hydraulic handbrake to keep things sideways! The exterior consists of a Spirit-Rei widebody fenders that house the wide 18×11.5 and 18×10 wheels filled in with a set of Nissan GTR front brakes and knuckles then finished off with a set of Racing Logic Coilovers!