Stanced Subaru WRX STI Wagon Featuring Status Racing Seats

This Subaru WRX STI Wagon is no stranger when it comes to hugging asphalt and breaking necks! The owner @Jacek21 has outfitted his car with a number of tasteful mods including a set of deep dish AG Wheels, Black Top Aero and a set of Status Racing Red GT-X seats.

Click here to shop all Status Racing seats.

Subaru Status Racing Hatch


Subaru Status Racing 1 Stance Status Racing fitment Status Racing Subaru Hatch

Scion FR-S With Red Carbon Status Racing Seats | Project Kaiju86

First glance at the Project Kaiju87 Scion FR-S and you will be left with your jaw on the ground. It features a set of Status Racing Red Carbon Fiber Ring GTX seats with 4-point Takata Harnesses, custom Merrill Performance harness bar, complete ML24 wide aer0 kit that was painted the Silver Ignition by CIA Customs in Las Vegas, Work Meister M1 3-Piece Wheels and the list goes on! The Project Kaiju86 is defiantly one of our favorites GT86’s and we are glad to be apart of such an amazing build! Check out the photos and complete list of mods below.

For more pics and info on this build follow Jason’s project Instagram @project_kaiju86.

Configure your own Status Racing Seats today Click Here


  • Silver Ignition 10 year anniversary paint
    done by CIA Customs of Las Vegas
  • ML24 front lip
  • ML24 side skirts
  • ML24 rear spats
  • ML24 wide body arches X4
  • Tom’s tail lights
  • Gt86 headlights w/ HID and blue tint
  • 10 year anniversary badges
  • Beat Sonic Blaid Antenna
  • OE Style Rear Diffuser
  • Custom Rays Factory GT Wing,
    5150 Carbon Wrap & Custom powder coat
  • J Blood Carbon Fiber visors
  • Foglights with custom paint bezels
  • RGB multi-color LED lights
  • 10 series Push start button
  • 10 series toggle climate control switches
  • 10 year anniversary glowing dashboard
  • 86 Center Console plate
  • Custom Blue Vent bezels and Blue
    climate knobs
  • Status GTX Red Carbon Fiber Seats
  • Custom harness bar by Merrill Performance
  • Takata 4-point racing harness
  • Custom Kendama Tribute shift knob
  • Pioneer head unit touch screen
  • Sony Xplode AMP
  • CIA Customs 10” custom sub ported box
  • RE Audio 10” sub woofer
  • 2.0 Liter, 4-Cylinder, Boxer engine 6-speed
    manual transmission
  • Mishimoto Oil Cooler
  • Mishimoto Radiator hoses
  • AEM Electronically Tuned Intake System
  • Greddy Evo 3 Full Catback Exhaust
  • MXP Front Pipe
  • NRG Fender Washer Bolts
  • Megan Racing EZ street Coilover Kit
  • Camber bolts
  • AEM Triangular Strut Bar
Wheels and Tires
  • Work Meister M1 3pc 18X9.5 -10 / 18X11 -15
  • BFGoodrich Sport Comp2 235/40 and 265/35
  • R1 Concepts cross drilled and slotted rotors: custom painted calipers
  • Work RS-R blue lugnuts
  • Mishimoto
  • BFGoodrich Tires
  • Meguiar’s
  • K&N Filter
  • ML24
  • CIA Customs LV
  • R1 Concepts




11094459_887758194621021_1594212199_n 11117018_1617733298449342_1775699950_n

image4 image3 image2 image1


11352159_530157460475755_269841841_n 11850110_777779348999048_497291387_n  12145359_878189388944142_494178560_n

Blue & Green Should Never Be Seen Without A Racecar In Between

Client submitted photos are always great and seeing cars come together can be such an amazing thing to witness. Hard work and long hours in the pursuit of the “perfect” ride, Nath Howell seems to have gotten one step closer with his Subaru build.  This bug eye is sitting beautifully on a set of Work wheels and he was able to tie his interior together complementing his Takata Green harnesses with a pair of blue Statüs Ring seats. Pictures speak much more so we have included a few below for your viewing pleasure. Enjoy.

See more of Nath Howell on IG : @original_bath_towel

FullSizeRender (1)

FullSizeRender (3)

FullSizeRender (4)



Far From Stock! Jeff’s Subaru STI Featuing Status Racing Seats

Jeff’s 2004 Subaru STI is far from your everyday ordinary Subaru on the street! The car has been outfitted from top to bottom and we are happy to be among his very impressive list of mods! (See below for full list) His STI features a set of our Status Racing Laguna Carbon Kevlar Seats.

You can check out more of his car and his photography here on his flickr here





– Tomei m7960 Turbo
– GrimmSpeed PnP Exhaust Manifold and Crossover Pipe
– GrimmSpeed TGV Deletes
– GrimmSpeed Radiator Shroud
– GrimmSpeed Hood Struts
– GrimmSpeed Lightweight Crank Pulley
– APS 525dr FMIC
– 70mm APS CAI
– Forge Racing BPV
– Invidia N1 TBE
– AVO Turbo Inlet
– DW 850cc Injectors
– Walbro 255 Fuel Pump
– KillerB Oil Pick-Up Tube and Baffle
– KillerB Dual Reservoir
– Crawford AOS
– PIA Tune 350whp 330torque

Suspension and Wheels:
– F/R Cusco Sway Bars
– F/R Cusco Strut Tower Bar
– F/R Kartboy Endlinks
– FEAL 441 Coilovers
– Stage 2 StopTech Brake Kit
– 17×9 +35 GramLight 57D
– Dunlop Star Spec ZII 255/40/17
Rainy/ Snowy Weather:
– OEM 2004 STi BBS
– Michelins Pilot Sports A/S 225/45/17

– 05+ STi Rear Bumper with parking sensors
– 05+ STi Quarter Panel Flares
– WRX Side Skirts with F/R Strakes
– KS Tech Hood Scoop Delete
– KS Tech Louver Plate
– Rep V-Limited Front Lip
– License Plate Delete
– Hella Tones Painted White
– ForceWerkz Mature Style Diffuser
– JDM Spec-C Roof Vent
– JDM Fog Lights with Yellow Overlay
– JDM Rain Guards
-APR GTC-300 Wing
-APR Canards
-APR Front Wind Splitter

– Status Racing Laguna Carbon Kevlar Seats
– Rear 05 Black WRX Seat
– Auto Power Race Roll Bar/ Half Cage
– G-Force 6 point Harnesses
– Kartboy 6-Speed Short Shifter
– 6inch Shifter Extension
– JDM Black Duracon 6-Speed Shift Knob
– Pioneer 4100 touch screen
– Broadway Mirror
– ATI Gauge Triple Gauge Pod
– Prosport EVO Boost Gauge
– Prosport EVO Oil Pressure Gauge
– Prosport EVO Volt Gauge
– Custom Black Door Cards
– JDM Red Hazard Button
– Subaru All Weather Floor Mats
– Personal Grinta 350mm Steering Wheel
– Works Bell Quick Release and short hub

Status Sponsors Modded WRX Wagon

It’s been months since we last sponsored a car. We are proud to present the latest member to the Status Racing Team. This car passed the strict list of requirements that we have for a sponsorship car. We are happy to show you the before pictures of our latest Status Sponsored car. We will be receiving pictures from him once the seats arrive and once they are installed. Then the real fun starts. We get to see this car at meets and shows, showing off our Status Racing seats. Until all that happens, here are some of the details about this futuristic WRX wagon!








  • Manley Performance Forged Pistons
  • Manley Performance Forged H-beam Rods
  • ACL Race Bearings
  • STI Oil pump, Manley Performance Springs and Retainers
  • Ferrea Valves
  • Brian Crower 272 Cams
  • Killer B oil pick up
  • Perrin Fuel rail
  • Perrin 3inch turbo inlet
  • Perrin Equal length manifold
  • Grimmspeed external gate up pipe
  • Tial MVS wastegate
  • Blouch Performance Dominator 3.5 XT-R Turbo (stock location GTX3076)
  • APS intercooler piping
  • Tial Q BOV
  • ETS 4inch Custom intercooler core
  • Protuned by Motion Lab Tuning(the shop that I work for) 517awhp/478ftlb
  • STI 6speed swap


  • Airlift Performance Struts
  • Accuair Elevel Management
  • 2x 3gallon Airtanks
  • 2x 400c Compressors
  • Perrin Anti Lift Kit
  • Whiteline rear lateral Links
  • Whiteline Roll Center Adjuster
  • Project Mu 355mm Big Brake Kit with matching Rear STI Brembos
  • Project mu Bforce pads


  • Grip Royal hand painted steering wheel
  • Hand painted mural headliner(Japanese theme, professionally painted)
  • STI Transmission surround
  • PBM Shift Knob
  • Defi Gauges


  • Sedan front end conversion
  • Genuine Karlton Fender Flares
  • Mature Rear diffuser
  • RS hood(scoopless)
  • Shaved Roof
  • Sti Grp N Front Lip


  • 18×11.5 Rotiform TMB(currently the largest wheel to my knowledge on a Subaru Wagon)
  • 255 35 18 Hankook Ventus V12 tires
  • Project Mu Super Lock 7 Lug Nuts



Keep It Classy STÄTUS Fans

This classy gent of a car was found on Instagram. Between the mustache and the wood steering wheel, we think this Subaru is one of a kind. So why not stick some one of a kind seats in it?

He went with the FIA approved black cloth and black FRP backing with some standout blue harnesses to match the bright blue interior of the car and the harness bar. To top off the sleek subie, he has a wood grain steering wheel. It doesn’t get classier than a wood grain steering wheel. If you’re looking for that final, custom piece, to complete your masterpiece. Take notes,  and keep it classy STÄTUS Fans.






Diamond Stitch Icon Seats in STi

Alex Logan in Anchorage Alaska just sent us some pictures of his diamond Stitch Ultrasuede seats installed in his Hawkeye STi and I must say they look legit. These seats are in Deep French Grey Ultrasuede with diamond Stitch and Black STÄTUS Logo these are also just preliminary pictures until he gets the rest of the interior to match. So stay tuned for a more full feature. The door cards, headliner, pillars, and trunk are all going to be matching along with some outside shots of the car with a pretty extensive mod list. They’re isn’t a huge import scene up in Alaska but Alex’s car is definitely on par with some of the cars we see down here in Phoenix’s import crowd.

WR Blue WRX with Black STÄTUS Racing Seats

This WRX didn’t always look like this and as many new WRX owners will find it is often very hard to find an unmolested WRX much like a virgin S13 240sx or Honda Civic. Andrew went through his trials and tribulations with his ride as all of us enthusiasts have and has made this WRX not only road worthy but also his own. The WRX puts down hp and torque numbers (engine friendly I might add) that are nothing to scoff at. 300hp and more than 320 lb-ft of torque not bad for a car that little over a year ago was plagued with a blown transmission clutch and countless other electrical gremlins from the previous owner. With the motor sound and the suspension dialed in  Andrew had big plans that involved Rally but quickly realized the successful rally team runs on major sponsors or a rich mans wallet so he decided to do what any smart would be racer would do get into your local solo racing or AutoX scene. He needed a seat that would hold him in but was still comfortable for daily driving. He chose STÄTUS Racing seats and has never doubted his decision. The seats are a great addition even when Andrew decides to take his car to the next level he knows the STÄTUS Racing Ring seats will be up to the challenge. These Rings provide the much needed lateral support that the stock seats just can’t provide with the G’s you can pull in a well tuned AWD vehicle. These seats are sure to ensure that Andrew will spend more time thinking out the next downshift and hairpin rather than having brace himself. After all The Regular Ring seats like the ones in this WRX are FIA approved so he should have no trouble passing tech when he moves up to full track events.

Check out this link STÄTUS Racing Ring Bucket Seats

Thanks Again Andrew for the pics and we will be sure to follow your progress in the grassroots racing scene in the Pacific Northwest.



Hot Off the Presses – Black and Gold Ring GT

Thought we would share some pics of this latest combo going out to a Subaru customer.  The black alcantara Ring GT seat features gold stitching and logo mated to our signature kevlar back.  Part of the Status Racing Icon Series, you can configure a seat however you like and share it with your friends on Facebook, Twitter, or Email.  So go check them out!  Also don’t forget to view more of our Seat Photo Gallery here.

We have Ring FRP Shells instock and ready to rock!